THOUSANDS OF TOOLS FROM TRUSTED BRANDS
At Freeway, we don’t work with just anyone. We work with the top names in the industry. Bosch, Dewalt, Ronseal, Roughneck… The best tools, the best accessories, from the world’s best manufacturers. Names you can trust. Names you want on your side when there’s work to be done.
95% STOCK AVAILABILITY & NO MINIMUM ORDER
With over 70,000 products, 95% stock availability and no minimum order we’re very confident you’ll find exactly what you need. Simply use the search bar if you can’t find what you’re looking for.
CONTACT US IF YOU NEED HELP
There’ll be times when you want to find out more about our products and services, whatever your reason for contacting us, there are lots of ways to get in touch – and we’ll always be happy to help.
These KNIPEX 13 Series VDE Multifunctional Installation Pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. The head is made from forged, vanadium electric steel, multi stage oil-hardened. Chrome plated finish. The slim dimensions of these pliers enable easy access. Fitted with a bolted joint for precise, zero backlash operation of pliers.
With 6 functions:
-Smooth surfaces near the tips grip single cores without damaging them; serrated gripping surfaces and pipe grip for gripping flat and round material.
-Clear-cut outside edge on the jaw for working on flush-mounted junction boxes and deburring feed-through holes.
-Stripping holes for conductors of 0.75 – 1.5mm² and 2.5mm²
-Crimp die for wire-end ferrules 0.5 – 2.5mm²
-Cable shears with (induction-hardened) precision cutting edges for copper and aluminium cables up to 5 x 2.5mm² / dia. 15mm
-Gripping, without opening the pliers completely (intelligent latching mechanism in the spring assisted version). The cutting edge remains closed and protected
These Knipex VDE Multifunctional Installation Pliers have an opening spring integrated in to the joint. The activated locking lever keeps the cutting edges closed while other functions remain active.
The intelligent latching mechanism enables you to ‘grip’ without opening the pliers. The cutting edge remains closed and protected.Barcode: 4003773075325
Manufacturer code: 13 96 200 SB
With ratchet the torque wrench can be used for both tightening and final checking of the torque. Reversible with lever, but only for right hand action for torque checking. Equipped with angular gauge for after tightening.
Satin finish and rubber handle.
Graduated in Nm and ft.lb. with lockable setting.
Accuracy : ± 4%.
3/4 in. Square drive.
Torque wrench according to DIN 3122.
Range 90 to 450Nm / 50 to 340 ft.lbBarcode: 5020385030275
Manufacturer code: 3492AG-E
Rapidaptor® BiTorsion® Universal Bit Holder with Strong Permenant Magnet and Quick-Release Chuck fits for bits Wera Series 1 and 4.
Hexagon Drive: 1/4Inch.
Manufacturer code: 05053923001
Everbuild Self Levelling Floor Compound is a cement based product used to level out uneven floors and screeds prior to laying ceramic tiles, thermoplastic tiles, lino, wood block flooring or carpet. Mix with either water or EVERBUILD FLOOR FLEX PLUS to give a free flowing self levelling topping.
When mixed as directed, the compound provides a free flowing mix that sets in 90 minutes and can be overlaid after only 8 hours at normal temperatures.
NOTE: This product is not suitable for use as a final wearing surface.
Size: 20kg.Barcode: 5029347003012
Manufacturer code: SEL20
The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance.
The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick.
Cutting Depth: 51mm.
Starrett DCH0078 Deep Cut Bi Metal Holesaw has the following specification:
Diameter: 22mm (7/8in).Barcode: 0049659005561
Manufacturer code: BF6015
ForgeFix TechFast Roofing Sheet to Steel Hex Extra Heavy-Duty Screws are used for joining metal roofing panels to steel frame buildings. The screws are fire resistant and corrosion resistant. Protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours.
Complies with EU Safety, Health and Environmental requirements.
Supplied without washer.
These ForgeFix TechFast Roofing Sheet to Steel Screws have the following specification:
Size: 5.5 x 100mm
Effective Thread Length: 51mm
Head Type: 8mm Hex
Pack Quantity: Box of 100
Drill Tip: No.8
No.8 drill tip for self-drilling in extra heavy gauge steel up to 20mm.Barcode: 5028485190899
Manufacturer code: TFHHUWSD55100
Plastic Storage Box, generally for power tools, but can be used for other hobby items.
Width. 330 mm.
Depth. 130 mm.
Height. 470 mm.Barcode: 5015244000308
Manufacturer code: TP030
IRWIN Record Chain Wrenchs are robust and provide maximum grip on round or irregular shapes. Not for use on copper pipe or non-ferrous pipes. Easy to use, you simply loop the chain around the pipe, lock it, and the jaws will grip in the direction of turn.
Great for use in confined spaces, trenches, or close to walls. With its double ended reversible replacement jaws and a high breaking strain tensile steel chain with fast positive lock.
The cast tubing handle combining strength and lightness.
Note: Not for use on copper pipe or any non ferrous pipes.
The Record T234C Chain Pipe Wrench has the following specification:
Overall Length: 1300mm (51in).
Capacity: 25-200mm (1-8in).Barcode: 0734442113287
Manufacturer code: T234C
Aluminium Oxide fibre discs are tough and sharp, combined with a dense semi-rigid backing gives this product extremely long life. It is ideal for working on metal using an angle grinder.
Use with FLV56835 backing pad, sold separately.
1 x Pack of 10 Flexovit Aluminium Oxide Fibre Discs 115mm Fine 80gBarcode: 3157625554269
Manufacturer code: 63642527562
The Zarges Multi-Purpose Ladders cover a multitude of uses with compact transport dimensions.
The ladder can be used as a lean-to ladder with or without support, a stepladder which can be ascended from both sides, or as a practical working platform. It is easy to transport with four folding sections.
The multi-purpose ladded is manufactured from high strength aluminium extrusion, with side rails for maximum stability. It has replaceable 2-component plastic end caps to ensure positioning without risk of slipping, and high-strength ZARGES quality flanged connection between rungs and stiles for extra safety.
External width of ladder body: 350 mm.
Conforms to EN 131 standards, 150 Kilo rating, and has a 10 year guarantee.
Number of rungs: 2 x 3, 2 x 4.
Dimensions folded: 745 x 1210 x 275mm.
Height as stepladder: 2m.
Height as workplatform: 0.99m.
Length as lean-to ladder: 4.19m.
Stile depth: 59mm.
Delivered Direct to Business, Site or Home, please note a carriage surcharge may apply dependant on the delivery address, please contact us for further details.Barcode: 4003866423811
Manufacturer code: 42381
The DMT D9 Diamond sharpening bench whetstone has non-slip feet and will not break, chip, crack, hollow or groove. The D6 whetstone is made from the hardest material which is one of the most efficient sharpening abrasive. Available in unique interrupted surface and continuous surface, light pressure produces a sharp edge with just a few strokes.
Use water for lubrication no oil, smell or mess and can hone ALL hard materials: carbide, steel, etc. and is supplied with Non-skid mat.
Precision, continuous monocrystalline diamond bench whetstones with rubber feet. The grit size is etched into the side of the whetstone. The grits are denoted by a dual coloured circle which is set into one end.
Blue: Coarse Grade 325, 45 micron.
Red: Fine Grade 600, 25 micron.
Green: Extra Fine Grade 1200, 9 micron.
Length: 150mm (6in)
Blue: Coarse 325g, 45 micronBarcode: 0017042007638
Manufacturer code: DMT-D6C
These ForgeFix traditional slotted round head Wood Screws have a Black Japanned finish, and are used in many decorative and ironmongery applications.
Used for fastening many ironmongery products such as Tee-Hinges and Antique furniture.
Japanned is most often a heavy black lacquer, almost like an enamel paint. Ironware is often Japanned black for decorative purposes. It can also be used to render fixings rust-proof.
With Slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw needs to be driven below the material surface a Parallel tip screwdriver should be used.
Round head screws have a flat under head surface making the screw ideal for laying flat on sheet material of all types, reducing deformation. The screws have single threads, which have been designed to offer higher pull out values and quicker insertion.
Wood Screw Slotted Round Head ST Black Japanned 1.1/4 x 8 Box 200Barcode: 5028485994114
Manufacturer code: RH1148BJ
The DEWALT DW274K Professional Drywall Screwdriver with variable speed, is ideal for fastening drywall and panels to wooden or metal studs. Removeable depth sensitive set and forget nosepiece for consistent fastener depth. It has a compact, lightweight design that helps to reduce fatigue and increase productivity. The soft grip handle and switch help to reduce vibration and enhance user comfort.
Input Power: 540 Watt
Bit Shank: 6.35 (1/4in)
No Load Speed: 0-4,000/min.
Screw Capacity: 4.8mm
Weight: 1.3kgBarcode: 5011402270750
Manufacturer code: DW274K-GB